PRODUCTS - Collision Prevention Beam Switch

PRODUCTS : Collision Prevention Beam Switch

FEATURES

	Suitable for collision prevention
	Supplied with relay and transistor outputs
	Using modulated infrared light signal
	Able to adjust the detection range by primary and secondary gain controls
	Supplied with primary and secondary outputs
	Overload protection circuit for transistor outputs

SPECIFICATIONS

Type		AC Type	DC Type
		KPS-P300S	KPS-P300DS
Detecting Distance	G1	0.5 ~ 5m
	G2	30 ~ 80% of G1
Input voltage		110 /220VAC(50/60Hz)	12 ~ 24VDC ±20%
Power Consumption		Approx. 2.5VA	Approx. less than 100mA
Light Source		Modulated infrared LED
Light Wavelength		940nm
Response Time		Less than 80m sec
Distance Error		20% of detecting distance
Output	G1	NPN Transistor Open Collector
		Contact Relay : 1c contact	-
	G2	NPN Transistor Open Collector
		Contact Relay : 1c contact	-
Contact Rating		250VAC, 2A (Resistive load)	-
Life		Mechanical : 5,000,000 operations Electrical : 200,000 operations
Output Mode		Light ON or Dark on selectable
Sense Adjustment		Two adjustor for G1 and G2
Detecting Function		Four detecting patterns selectable by DIP switches
External Interference Light Level		Incandescent light : approx. 2,000 lx at surface of detector
Indicator		G1 : Green LED, G2 : Red LED *Light Incident : ON
International Protection		IP54 (Indoor use only)
Insulation Resistance		100MΩ min. at 500VDC
Dielectric Strength		1,000VAC(50/60Hz) for 1min.
Noise Strength		±1,000V between AC power terminals
Ambient Temperature		-10°C ~ +50°C(under unfrozen condition)
Storage Temperature		-20°C ~ +55°C(under unfrozen condition)
Humidity		35 ~ 85%RH
Vibration		0.5mm amplitude at frequency of 10~55 Hz in each of x, y and z directions 4 cycles for 8 min per a cycle
Shock		10G
Housing Material		ABS Resin, Color : Ivory
Weight(Approx.)		470g	400g
Cable Length		2m