PRODUCTS - KTM-1, 2 Type Timer

PRODUCTS : KTM-1, 2 Type Timer

FEATURES

	Wide Timing Range of 1 Sec ~ 24 Hours
	High accuracy ±0.3% to 0.5%
	LED power and Time-Up indicators to monitor the operations
	Supplied with an instantaneous and an on-delay relays
	Low power consumption

TIME SPECIFICATIONS

SPECIFICATIONS

Model No.	KTM-1	KTM-2
Mounting	Surface mounting	Flush mounting
Operation Mode	ON DELAY
Display	Red LED
Wire Connection	KTM-1 : KH-TDR-R8
	KTM-2 : KH-MR-8, KH-C-8U
Input voltage	AC : 110/220VAC(50/60Hz)
	DC : 12, 24, 48, 110VDC
Operating Voltage	Less than ±10% of Input voltage
Power Consumption	AC : Approx.2.5VA, DC : Approx. 5W TIME UP
Resetting Time	Above 0.5 Sec
Contact Rating	110VAC, 3A / 220VAC, 1.5A / 24VDC, 3A (Resistive Load)
Life	Mechanical : 1,000,000 operations Electrical : 200,000 operations
Insulation Resistance	100MΩ min. at 500VDC
Dielectric Strength	2,000VAC(50/60Hz) for 1min.
Repeat Accuracy	Below ±0.5% of maximum setting time
Setting Error	Below ±5% of maximum setting time
Voltage Error	Below ±0.5% of maximum setting time
Temperature Error	Below ±3% of maximum setting time
Ambient Temperature	-10°C ~ +50°C(under unfrozen condition)
Storage Temperature	-20°C ~ +55°C(under unfrozen condition)
Ambient Humidity	35 ~ 85%RH
Vibration	Double amplitude 0.5mm at the frequency of 10 ~ 55Hz in X,Y and Z directions
Shock	Approx.30G(300m/s²)
Protection	IP50 (Indoor use only)
Housing Material	ABS Resin
Weight(Approx.)	200 ~ 260g